96 Ford Bronco Autopage install

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=23967
Printed Date: July 07, 2025 at 5:38 AM

Topic: 96 Ford Bronco Autopage install

Posted By: nero7747
Subject: 96 Ford Bronco Autopage install
Date Posted: January 05, 2004 at 10:59 AM

Hey you guys helped me out last year so I'm hoping someone can do the same now. I just got an autopage 850lcd alarm to put in my 96 Bronco. I was wondering if you guys could give me any tips or hints on how to install this thing. The remote start is something I'm a little worried about. Also I want to use a window module to raise and lower the rear window. Was wondering if anyone has done this or know how hard it would be. Also do you guys know where I can find a wiring diagram for my truck. My haynes has one but I'm looking for one that would be more specific to this alarm and the wires I have to find. Thanks Joe

Replies:

Posted By: excursion_dude
Date Posted: January 05, 2004 at 2:23 PM

Start by removing both kick panels, driver and passenger. The door lock wires are on the passenger side.

The link for the wiring diagram is here,

https://www.the12volt.com/installbay/alarmdetail/806.html

I have a 94 bronco with a viper and remote start if you need pics. Also look to fullsizebronco.com for any further help with your specific vehicle repairs. Good luck,

Posted By: nero7747
Date Posted: January 05, 2004 at 3:51 PM

Appreciate it. I'm going to do the install this weekend. If anyone has any other tips feel free. Thanks again