01 navigator entry illumination

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=23969
Printed Date: July 07, 2025 at 4:50 PM

Topic: 01 navigator entry illumination

Posted By: hollywood183
Subject: 01 navigator entry illumination
Date Posted: January 05, 2004 at 11:37 AM

I am trying to figure out how to hook up my interior lights to the disarm feature of my alarm. It did it with the factory keyless entry. I am using an audiovox aps996 alarm. Any help is appreciated..Thanks

Dave

Replies:

Posted By: hollywood183
Date Posted: January 05, 2004 at 11:50 AM

Just another question from my original post. I see the diagram in the manual and I see what I have to do with the relay. In the relay, the alarm wire goes to 86 and 85 goes to a fused battery source. What is a fused battery source. then 87 goes to entry illumination wire of vehicle. Does anyone know what wire that is in an 01 Navigator. And then I see 87a and 30 go together to either a fused 12V source or a chassis ground. Does anyone know which one it would go to in the 01 Navigaor?

Thanks

Dave

Posted By: draasch
Date Posted: January 05, 2004 at 4:54 PM

86 and 85 do not go to the same location.....a fused battery source is a 12v paower with a fuse in line

Dome Light BLACK/ L BLUE (+) 16 PIN CONN. IN PASS. KICK PANEL **

look to left of this post under illuminated entry and wire it up like that...

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt