1999 Mazda 626 Alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=24031
Printed Date: July 18, 2025 at 6:12 AM

Topic: 1999 Mazda 626 Alarm

Posted By: Jay Sigmann
Subject: 1999 Mazda 626 Alarm
Date Posted: January 06, 2004 at 10:10 AM

Hi,

I've got a 1999 Mazda 626, whose alarm goes off intermittantly (only when the alarm is armed). I'm looking for a wiring diagram and also some basic guidance on where & how to begin troubleshooting this problem. Can anyone help?

Thanks, Jay

Replies:

Posted By: cpgoose
Date Posted: January 06, 2004 at 10:55 AM

Do you know if it's the factory alarm, or do you have an aftermarket one installed?

-------------
Q: What's the best nation in the world?
A: Donation! Donate to the12volt.com

Posted By: Jay Sigmann
Date Posted: January 06, 2004 at 11:53 AM

Sorry, forgot to mention it's a factory alarm system

Posted By: Velocity Motors
Date Posted: January 06, 2004 at 12:55 PM

LIGHT GREEN/ RED wire at the driver's kick panel at the CPU in pin 8. This is a (-) trigger so if you want to permanently disable the system, attach this wire to ground and it will never arm.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: Jay Sigmann
Date Posted: January 07, 2004 at 3:19 PM

Thanks to Velocity Motors - disabling it is definitely a good start.

Print Page | Close Window