AutoLoc Power Locks, 1999 Sonoma
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=24134
Printed Date: May 09, 2025 at 1:22 PM
Topic: AutoLoc Power Locks, 1999 Sonoma
Posted By: ryan sonoma
Subject: AutoLoc Power Locks, 1999 Sonoma
Date Posted: January 07, 2004 at 5:56 PM
I recently recieved the Autoloc CK2000 Power locks and keyless entry kit for christmas. my plan was to install it on my 1999 Sonoma myself but after looking at the very vague instructions I became a little confused on the wiring... If anyone has done this before or knows how to do this, would you please give me a reply. I checked on how much it would cost to get it installed and got quotes from 150-275 and right now I can't expend that much money (due to college expenses). If you need anything, pictures of the trucks inner doors please email me...thanks a bunch!!!
Replies:
Posted By: HamiltonAudio
Date Posted: January 07, 2004 at 8:13 PM
what part of the wiring is confusing? is this a central locking system with 5 wire actuators and a relay box with pre-terminated harness? or are they simply 2 wire actuators? did it come with relays? what else did the kit come with? give us some details and we can help a bit more... b
Posted By: draasch
Date Posted: January 07, 2004 at 8:18 PM
ok ryan..........as far as mounting the hardware... you may have to get creative...as far as the wires...should be a piece of cake.....send me a link for the door locks.... ------------- Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
Posted By: ryan sonoma
Date Posted: January 07, 2004 at 10:05 PM
Its a 5 wire actuator and really I think I can probably figure out how to mount it, but the wiring is another thing....the problem with the wiring is that i don't know what to tap into from the truck, and which wires go to what? I hope this is the link you were wanting also I hope i did it right ..https://www.autoloc.com
Posted By: HamiltonAudio
Date Posted: January 08, 2004 at 7:52 AM
the 5 wire locks have a feedback switch in them that causes a manually operated lock (unlocked with key or hand) to eletrically pop all other locks. Did the kit not come with a pre-terminated harness and relay pack? If not, wiring will be interesting to get the feedback working (never done feedback without the relay pack). However, if all you care about is locks working, you should find a green and blue lead on each lock motor. These are lock/unlock triggers, working on a reversal rest at ground system. Put ground on one lead and pulse +12V on the other and you'll see the motor work. Reverse the leads (ground and pulse +12V on the opposites) and you'll see the motor work in reverse. Simply run a pair of wires to the GREEN/ blue wires on each motor into the vehicle and trigger them with a reversal setup (2 relays)....can you be a bit more clear as to what you're not sure of? b
Posted By: draasch
Date Posted: January 08, 2004 at 10:29 AM
the wiring is not that bad once you mount the motors you just wire it up color to color...the harness should have the different color to match each motor. you will need to find power and ground. make sure you use the in-line fuse on the power wire. you tap into the Constant 12 volts RED & RED / WHITE IGNITION SWITCH HARNESS for your power. your relay are buit into the little control box that comes with the door locks.
check out the web site if you have more questions about the wiring. they have all the info you need there
https://www.thehoffmangroup.com/files/pdf/instructions/CL,CK,CA2000-4000.pdf ------------- Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
Posted By: ryan sonoma
Date Posted: January 08, 2004 at 12:24 PM
hey thanks guys, i am going to start putting it in today or tonight so I probably will have some more questions...thanks again and you will probably here from me again pretty soon..
Posted By: ryan sonoma
Date Posted: January 10, 2004 at 1:07 PM
I recently just put in the AutoLoc Power Door Locks on my 99 Sonoma. Keyless entry came with the kit, but I couldn't figure out how to Install it , mainly my question is where do I install the keyless entry control box (it also has a 7 inch antenna that comes out of it) in my truck and also how do I wire so that the lights will flash when I lock and unlock it. Thatnks for the help....
Posted By: draasch
Date Posted: January 10, 2004 at 1:26 PM
did you get your door locks hooked up yet???? ------------- Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
Posted By: ryan sonoma
Date Posted: January 10, 2004 at 2:57 PM
yep, it took 5 hours but it works, thanks again for the help!
|