Clifford Matrix RS 3 alarm pager problem
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=24154
Printed Date: June 09, 2024 at 1:45 AM
Topic: Clifford Matrix RS 3 alarm pager problem
Posted By: msf145
Subject: Clifford Matrix RS 3 alarm pager problem
Date Posted: January 07, 2004 at 10:01 PM
one thing after another, stuff keeps goign wrong. now my pager to my alarm is messed up. i have the clifford matrix rs 3 alarm with the 2 way pager system. when i hit arm and disarm the car locks/unlocks and beeps etc. but the signal the pager is suppose to receive from the car is not working. it makes the beeping noise letting u know that it doesn't got a signal. and the status of the car is wrong. it permantely shows unlock on the pager even when the car is locked. i talked to a guy at an audio shop and he said the remote is bad. but i want to make sure it's not something else. these remotes are like 100 bucks. if it is the remote anyone know where i can find the remote cheaper??
Replies:
Posted By: wire4veins
Date Posted: January 08, 2004 at 4:01 AM
It sounds like the remote is bad. It could possibly be the brain but most likely the remote/pager. Call a Clifford dealer and see about any warrranty possibilities
Posted By: msf145
Date Posted: January 08, 2004 at 10:09 AM
yea i didnt send my warrenty card in so im screwed.
Posted By: profuse007
Date Posted: January 08, 2004 at 11:57 AM
those remote really sux, a buddy of mind having the same problem with false indicator. btw, the paging mode might be turn off.
if you decide to get a remote, get the newer version from clifford rs3.5 or viper 79xv. this can be purchase through ebay for 75 bucks.
-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
Posted By: msf145
Date Posted: January 08, 2004 at 9:51 PM
do u know how to change the paging mode back on?
Posted By: serialthrlla
Date Posted: January 08, 2004 at 10:06 PM
some places honor the warranty where the system was purchased. I think the warranty covers the two way remotes for a year. you might wanna check into it. those remotes goin bad is actually a common problem on the rs3
Posted By: profuse007
Date Posted: January 08, 2004 at 10:35 PM
hold all 4 button simultaneously they youll hear a long beep, now you enter the program mode. w/in 5 sec press the speaker icon, either on or off.
-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
|