nissan 300zx remote starter

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=24281
Printed Date: April 29, 2024 at 4:42 AM

Topic: nissan 300zx remote starter

Posted By: scauntay
Subject: nissan 300zx remote starter
Date Posted: January 09, 2004 at 8:20 PM

i have a remote starter kit for my Z but im not sure about the wiring. i can do it, seems easy, but i need a detailed wiring diagram for my 1991 300zx non turbo. if anyone can help me out that would be great. thanks

Replies:

Posted By: BNLUIS
Date Posted: January 09, 2004 at 8:35 PM

NISSAN 300ZX 1990-91
WIRE	COLORS	LOCATION
12 VOLTS CONSTANT	BLK/WHT	IGN HARNESS
IGNITION 1	BLK/RED	IGN HARNESS
ACCESSORY /HEATER BLOWER 1	BLU	IGN HARNESS
STARTER	BLK/WHT AND BLK/YEL	IGN HARNESS
PARKING LIGHTS	GRN/RED	AT LIGHT SWITCH
DOMELIGHT	RED / WHT	AT ANTI-THEFT MOD "BEHIND GLOVE BOX"
PWR DOOR LOCK	ADD ACTURATOR	DRV DOOR
PWR DOOR UNLOCK	ADD ACTUATOR	DRV DOORSEE DIAGRAM
TACH SENSOR	YEL/RED	AT ECM
BRAKE	RED / BLK	AT SWITCH ABOVE BRAKE PEDAL
HORN	GRN/WHT (-)	STEER COLM
FACTORY DISARM	GRY/RED	DRV KICK PANEL

-------------
Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.

Posted By: scauntay
Date Posted: January 10, 2004 at 2:58 PM

thanks bnluis, would happen to know where i can get a detailed illustration of all that stuff?

Posted By: dyer
Date Posted: January 10, 2004 at 4:24 PM

all your ignition wires will be run together in the ignition harness (under steering column, and most of the others will be in a kick panel. Once you start looking, you will find them quickly. good luck

-------------
Dyer

Posted By: scauntay
Date Posted: February 05, 2004 at 2:03 AM

i know this post has been dead for a while but i just found time to get to doing this. i have an ass load of wires that i have no clue where they go. here is the list if anyone could help out. i know some of them dont apply to my car but here is what is onthe starter kit i got....ground-ground for temp sensor
manual start input(-)-temp sensor
+12v dc-1a max power for door lock module
door unlock output(-)-250mA (-) output:factory door
     lock
+ trigger(+)-door pin switch
glow plug input(-)-GP wire: changes (+) to (-)
factory disarm output(-)-250mA (-) output
hood input(-)-hood pin switch
interior light output(-)-250mA (-) output
brake switch input(+)-brake wire changes (-)to(+)
tach or oil sensor input-vehicle tach or oil sensor
      wire
starter interrupt output(-)- 250mA (-) output
-trigger input(-)- door pin switch
ground out when run(-)- 250mA (-) output
horn output(-)- 250mA (-) output
parking light output(+)- 10A (+)relay output
trunk release output(+)-10A (+)relay output
parking light output(+)-10A (+)relay output
30A fuse- +12VDC input
ignition 1 output(+)-ignition 1
ground input
start output(+)-start
acc output(+)- acc
30A fuse- +12VDC input

Posted By: Teamrf
Date Posted: February 05, 2004 at 1:23 PM

door unlock output(-)-250mA (-) output:factory door
     lock
+ trigger(+)-door pin switch
hood input(-)-hood pin switch
interior light output(-)-250mA (-) output
brake switch input(+)-brake wire changes (-)to(+)
tach or oil sensor input-vehicle tach or oil sensor
      wire
starter interrupt output(-)- 250mA (-) output
-trigger input(-)- door pin switch
ground out when run(-)- 250mA (-) output
horn output(-)- 250mA (-) output
parking light output(+)- 10A (+)relay output
trunk release output(+)-10A (+)relay output
parking light output(+)-10A (+)relay output
30A fuse- +12VDC input
ignition 1 output(+)-ignition 1
ground input
start output(+)-start
acc output(+)- acc
30A fuse- +12VDC input

-------------
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.

Posted By: Teamrf
Date Posted: February 05, 2004 at 1:24 PM

Those are the wires you will need. Not all of them will be needed..if you don't want trunk pop or it is operated by a metal latch then you will need more equiptment for it.

-------------
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.