2004 chevy tahoe, alarm/remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=24346
Printed Date: June 03, 2024 at 10:54 PM

Topic: 2004 chevy tahoe, alarm/remote start

Posted By: hypersnow1
Subject: 2004 chevy tahoe, alarm/remote start
Date Posted: January 10, 2004 at 9:41 PM

I'm looking for a wiring diagram for a chevy 2004 tahoe for the locks and to remote start.I also have a Crime Stopper GMLK-U for the locks and it has a 4 pin connector that needs to be plugged into the doorlock port of the omega host system. Where is it located and what does it look like. Is there a way to tie the heated seats in so they would work also .Thanks

Replies:

Posted By: hypersnow1
Date Posted: January 11, 2004 at 9:28 AM

Looking for a wiring diagram for a chevy 2004 tahoe to install a remote start system. thanks

Posted By: ICKSTER40
Date Posted: January 12, 2004 at 11:03 PM

Your going to need a door lock interface module. everything runs on the data bus wire.

12+ - Red
Ign - Ign
2nd Ign - white
Starter wire - yellow
Acc - orange
2nd Acc - brown

-------------
DJ,Scottsdale Extreme Sound

Posted By: hypersnow1
Date Posted: January 25, 2004 at 11:49 AM

I have a 2004 Tahoe with a crimestopper PLDATA II in it. I have to arm the truck with the remote starter before it will let me begin to remote start the truck.If I arm the truck and remote start the truck right away everything is fine. If I arm the truck wait 1 minunite or longer and then remote start the factory alarm goes off.Any ideas. thanks

Posted By: jrilla
Date Posted: January 25, 2004 at 5:47 PM

That kit from crime stopper should disarm and arm for you in addition to locking and unlocking. I find it wierd that you would need to arm the truck before remote starting. Typically you would need to disarm.

There is a disarm wire in the door though. It is lt.green.

-------------
J Rilla

Owner/Installer

Posted By: hypersnow1
Date Posted: January 25, 2004 at 5:57 PM

It's the remote starter that requires me to arm before starting.Which in turn arms the factory alarm threw the PLDATA II. So after arming and waiting 1 minute or longer is where the proplem is.