factory disarm 2001 Impala
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=24349
Printed Date: November 11, 2025 at 8:34 PM
Topic: factory disarm 2001 Impala
Posted By: mark1957
Subject: factory disarm 2001 Impala
Date Posted: January 10, 2004 at 10:12 PM
I looking for the location of the factory alarm disable pin-out.My info says it's at pin-B3 at the C3 connector [lt. green]. I've also searched and all the info I've found says pin-out is at the same place. On my connector there is no wire at that pin-out. Actually my info[Wire Magic] had all but 2 pin-out locations right. Although the wire colors were right. There are 3 lt. green wires how can I test which one is the factory diasble wire?
Replies:
Posted By: chriswallace187
Date Posted: January 10, 2004 at 10:38 PM
generally, the factory disarm wire will go to ground when the key is turned to unlock in the driver's door. If your car doesn't have a wire at that pin you can just leave the factory disarm output alone for now and test how well everything works without it hooked up.
|