wires for the remote starter 97 range rvr
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=24416
Printed Date: November 13, 2025 at 11:15 AM
Topic: wires for the remote starter 97 range rvr
Posted By: samkelleytn
Subject: wires for the remote starter 97 range rvr
Date Posted: January 12, 2004 at 10:10 AM
the wire dia form the remote starter web site shows the starter wire for the 1997 range rover 4.0 se as PURPLE / pink. and is located in ignition harness, there is no such PURPLE / pink wire anywhere under the dash or ignition switch. please help, locate the #1 starter wire. thank you sam kelley ------------- sam kelley, memphis tn
Replies:
Posted By: mazdatruckin
Date Posted: January 12, 2004 at 10:41 AM
Notes I got say [WHITE/ red] (-) Ign Switch
This car's a bitch because all ignition, acc, and start wires are (-) so they all need to be inverted.
Posted By: samkelleytn
Date Posted: January 12, 2004 at 10:42 AM
should i just pass on this then? ------------- sam kelley, memphis tn
Posted By: mazdatruckin
Date Posted: January 12, 2004 at 10:46 AM
It's not an easy car... If I remember it's 5 wire for door locks, (-) parking lights, (-) ign, start, and acc wires. If you have lots of time and patience I would say go ahead. Beyond just those doors and ign switch, it's pretty easy because everything can be found at the BCM.
And if it has a factory alarm, then you would pulse the alarm wire and the lock wire at the same time. To unlock, pulse the disarm wire and unlock wire at the same time. IF it's for your personal veichle, then by all means go ahead. Let me tell you my first one is pretty frustrating because all the alarm's outputs are + so you need at least 3 relays for the ign switch. But there's no bypass of any kind so if you can overcome the ign switch, and the door locks, it's a piece of cake. But you may need up to 5 relays to do it all.
Posted By: mazdatruckin
Date Posted: January 12, 2004 at 10:47 AM
actually the arm/disarm wire is the same wire. Just pulse the unlock or lock wire to disarm or arm
|