2001 Honda Accord wiring for bypass kit

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=24420
Printed Date: November 13, 2025 at 3:30 PM

Topic: 2001 Honda Accord wiring for bypass kit

Posted By: bw05
Subject: 2001 Honda Accord wiring for bypass kit
Date Posted: January 12, 2004 at 11:23 AM

I purchased a cs423 remote starter and have it installed and the engine will turn over but not crank. Would the problem be that I must install the HODL bypass kit? If so how do I hook it up? What do I wire it to ?

Replies:

Posted By: bw05
Date Posted: January 12, 2004 at 12:20 PM

I just installed a remote starter system (CS423) and the engine will turn over but will not start. Do I need to install the HODL data bus door lock alarm interface that came with it and if so what do I wire it to. The instruction that came with it is not very claer on what to do to get it wired up. Can anyone help?

Posted By: profuse007
Date Posted: January 12, 2004 at 2:32 PM

can you list out the wires on the bypass, am not familiar w/ these brand bt ill take a shot at it.

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).

Posted By: bw05
Date Posted: January 12, 2004 at 3:18 PM

Thanks for the help, but I have gotten the information from the dealer that I need.

I needed to know were connector K and E are located on a 2001 Honda Accord.

This is to connect the bypass to:

Data out

Door switch out

Print Page | Close Window