97 Chrysler Sebring Coupe Remote Start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=24435
Printed Date: May 17, 2024 at 9:23 PM
Topic: 97 Chrysler Sebring Coupe Remote Start
Posted By: DaRacerz
Subject: 97 Chrysler Sebring Coupe Remote Start
Date Posted: January 12, 2004 at 4:41 PM
hello
first, like to say that I am new to this place and have never previous installed an alarm, so please don't bash me too bad.
As you know, I have no previous experience installing alarms and I want to install one myself. Though I do have vast knowledge in Electronics and know my way around my car well.
Anyways, i want to put in the Viper 791xv Alarm (which I already ordered). firstly, is it overwhelming dificult to do this job, and should I be able to get this done within 1 weeks time no problem?
now for the real questions.
Does anyone have or is willin to provide a general connection diagram to the Alarm Wiring Harness???
Akka, H1/Pin1 To Starter kill Relay
H1/Pin3 To.... And So on.
Can someone do that for me? I know where some of the stuff goes to, but for example, H1/Pin3 is remote start Activation Input. But i really have no clue what I am looking for in that case and the manual doesn't do good enough of a job exlaining it to me. All input and additional data greatly welcome, thx.
Replies:
Posted By: boomer_106
Date Posted: January 15, 2004 at 11:29 PM
|