Hey guys, hows it going.
My Alarm: Car Pro, AutoPage CPX-3600
I got a mustang 1989 coupe to be exact and i just got my alarm installed a couple days ago and i went back to the store because it was giving me a werid beep sequence but it just turned out to be my dome light was turned to the (on) position, but because my dome light dosnt work.. i didnt realize it. Now When i arm my system and disarm it the parking lights dont flash... normally when i arm it the parking lights and rear lights flash 1 and when i disarm it usually flashes 2 times... when i do a car locate they flash 12 times. I just disarmed my car and my lights didnt flash, i though it was werid so i armed it and nothing. I dont know much about this stuff but if you guys know the solution that would be awsome. I'd hate to keep going back and bugging the guys that installed it.
Nobody likes returns on an previous install, and I understand you'd prefer to not bother the installers that performed the work. What you need to understand is if you go to messing with something, you could void the warranty on your installation. When you go back to the shop, and they see you've done some tampering, they'll probably charge you to fix it (I would). Alarms are something you don't want to mess with unless you know what you're doing. Stereo problems can be a nuisance, but alarm problems can disturb the whole neighborhood when they false at 2am.
yes i understand that as well,
but i wanted to check on here to make sure it wasnt somthing as simple as i disabled it by a sequence of pressing buttons on the remote
Did you check your settings on the alarm? Mine i can arm/disarm with the lights off or on. You go thru the manual they will explain how to do this. Last thing is to check the fused from the alarm.
Ryan