Print Page | Close Window

2nd ignition

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=2451
Printed Date: July 29, 2025 at 12:37 AM


Topic: 2nd ignition

Posted By: bmfwalton
Subject: 2nd ignition
Date Posted: August 02, 2002 at 6:55 PM

I have installed a remote start in a car that had a 2nd ignition. So I just took the 2nd ignition wire and connected it to the one on the car and it worked. Now I am putting in the same alarm in a different car,(sidewinder 6500) and as I was reading through the directions it said for the 2nd ignition you need a relay. So do you really need one or not? My other car worked fine.



Replies:

Posted By: joyride2k
Date Posted: August 02, 2002 at 7:39 PM
On DEI units I believe only the 3rd ignition requires a relay. 1st and 2nd ignition do not require relays.


Print Page | Close Window