Print Page | Close Window

2003 durango bypass probs

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=24655
Printed Date: July 26, 2025 at 11:38 AM


Topic: 2003 durango bypass probs

Posted By: Alpine Guy
Subject: 2003 durango bypass probs
Date Posted: January 15, 2004 at 8:10 PM

I installed a autostart as-1414 into a 2003 durango with factory alarm, and i by passed the the key and all, but once and a while the truck locks out.  I think i grabbed the wrong alarm wire.  Its supposed to be ORANGE / green i think.  All my info is a t work, so i can't be certain.

I was wondering if anyone has any info on this truck as to why its acting so stupid.

The wire in talking about is the one that stops the horn from honking when you start the truck.

Thanks!




Replies:

Posted By: jrilla
Date Posted: January 15, 2004 at 10:11 PM
Disarm is a Lt.GREEN/ Orange thru a 1.5K Ohm resistor, and a double pulse will unlock. Lock and arm use the same wire thru a 620 Ohm resistor

Does that sound like what you did?

There are also 2 WHITE/ Green wires (only need one) in that same plug that you could have used for the lock and the unlock with 820 ohm and 320 ohm resistors respectively, but the Lt.GREEN/ Orange is still for disarm.



-------------
J Rilla

Owner/Installer


Print Page | Close Window