Cliffnet Wizard Help

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=24866
Printed Date: August 29, 2025 at 4:42 AM

Topic: Cliffnet Wizard Help

Posted By: Spiderman
Subject: Cliffnet Wizard Help
Date Posted: January 19, 2004 at 9:56 AM

I have cliffnet wizard running on a Windows 98 machine I am trying to hook to a Matrix RS 3. I have one end of the cable plugged into the serial port on my computer and the other end of the cable plugegd into the bit writer port of the RS 3. All connections feel slid. When I run Wizzard I get the message "Port available, no G4 system found." Am I doing something wrong or is the program not campatable with the RS 3?

Replies:

Posted By: scirocco16v
Date Posted: January 20, 2004 at 2:39 PM

wizard is only compatible with g4/g5, not matrix

Posted By: duvaller
Date Posted: February 26, 2004 at 8:36 AM

i have a intelliguard 8000 that will work with your cliffnet wizard,would you consider selling it being that its not compatiable with your system??? please advise duvaller@stis.net

-------------
jw aka duvaller

Print Page | Close Window