Print Page | Close Window

trc xr33 alarm wiring help

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=24906
Printed Date: November 10, 2025 at 7:21 PM


Topic: trc xr33 alarm wiring help

Posted By: showtime
Subject: trc xr33 alarm wiring help
Date Posted: January 19, 2004 at 9:39 PM

i need to know where i connect the - neg when arm & running wire.the - neg door trigger input.the spark plug input signal and finally the parking light input+/- wire
for a 02 ford explorer.



Replies:

Posted By: abright52
Date Posted: January 20, 2004 at 4:06 AM
-Neg when running should go to your Bypass Module (usually a brown wire)
-Neg door trigger input should connect to the door in some way so that when the door is opened the alarm is triggered. This can usually be connected to the dome light.
-Parking light wire can usually be found at the parking light switch, not sure on the color I don't have a diagram for that new of an Explorer
-Spark plug input I am not sure on, posssibly for the tach wire?

-------------






Print Page | Close Window