Print Page | Close Window

Programming Prestige aps 996c

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=25033
Printed Date: September 12, 2025 at 1:25 AM


Topic: Programming Prestige aps 996c

Posted By: eddiec
Subject: Programming Prestige aps 996c
Date Posted: January 21, 2004 at 12:11 PM

Hello again! I was wondering if someone could tell me how to change the run time for the remote start. It is set from the factory for 10 minutes. It says in the manual that you can change it but I can't seem to find where it tells you how to do it. Once again, thanks for your help.



Replies:

Posted By: eddiec
Date Posted: January 21, 2004 at 2:30 PM
Nevermind guys, I guess I wasn't looking good enough before. But now I found it! By the way, did I tell you how great this sight is?



Posted By: Teamrf
Date Posted: January 21, 2004 at 2:42 PM

Yea that programming can be a little tense..I hated it at first, but I got the hand of it after a while.



-------------
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.



Posted By: eddiec
Date Posted: January 21, 2004 at 8:00 PM
When it says to press channel 1 button does it mean the lock button? And would the unlock button be channel 2?


Print Page | Close Window