03 honda pilot remote starter

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=25047
Printed Date: July 22, 2025 at 9:04 AM

Topic: 03 honda pilot remote starter

Posted By: maddog52
Subject: 03 honda pilot remote starter
Date Posted: January 21, 2004 at 10:27 PM

I install a remote starter on a 03 honda pilot. I hook up the lock and unlock directly to the wire that are on the pass side. After the install the OEM remote does not work. What wrong?

-------------
Dog

Replies:

Posted By: tjdurham
Date Posted: January 22, 2004 at 9:57 AM

your lock and unlock wires are in the factory alarm connector under drivers dash green plug white\blue and white /green are your remotes not working alltogether or just when remote started if its just when remote started you need to do is interupt the 12 volt ignition input to your factory keyless entry

-------------
tj

Posted By: kenmci
Date Posted: January 22, 2004 at 2:02 PM

did you tap into the wire or did you cut the passenger lock, unlock wire?

Posted By: maddog52
Date Posted: January 22, 2004 at 3:01 PM

the wires are connected on the pass side. And the OEM remotes do not work at all the panic button does not work I tried both OEM remtes and i get the same resluts.

Also I taped into the wires and did not cut them.

The remote starter and door locks work fine on the remote starter unit.

-------------
Dog

Posted By: mark2003
Date Posted: January 23, 2004 at 4:24 PM

Is this when the vehicle is running or shut down? Because they don't work when vehicle is running!!

Print Page | Close Window