Print Page | Close Window

clifford arrow 2 in rs turbo

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=25062
Printed Date: July 19, 2025 at 11:54 PM


Topic: clifford arrow 2 in rs turbo

Posted By: rsturboboy2
Subject: clifford arrow 2 in rs turbo
Date Posted: January 22, 2004 at 5:01 AM

can somebody please help me i have just installed my clifford alarm thanks to some of the people on this site but every now and again i have no led on the dash i no that there is power getting the the alarm cos the pienzo sensor light flashes but when the light on the dash dosnt work when i close the door the lights seem to flash 2 times then they will do it again the same pattern then about 10 secs later the alarm will go of but the weird thing is it will not all ways do it when the thing stops working as soon as you re connect the batteier to the car the alarm will sound straight away and then the cliffoed light will start to flash and that hope some of this makes sence but its driving me nuts this alarm is its the worse alarm i have ever fitted in my life




Replies:

Posted By: boomer_106
Date Posted: January 22, 2004 at 5:59 PM
Before you reconnect power to the alarm put the key in and turn it forward to the run position. This should stop the alarm from going off when you hook the battery back up. As far as the led Im not sure.


Print Page | Close Window