Clifford matrix RS3.5
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=25132
Printed Date: July 12, 2025 at 7:48 PM
Topic: Clifford matrix RS3.5
Posted By: danxav13
Subject: Clifford matrix RS3.5
Date Posted: January 23, 2004 at 12:36 PM
I was wondering if anybody knew whether this system has a starter kill built in. I was thinking yes as it would maybe be part of the remote start relay bank. But what puzzles me is there is an orange wire for "an option dei starter kill relay". Please help. I don't wanna have to go back and put one in.
Replies:
Posted By: kenmci
Date Posted: January 23, 2004 at 12:54 PM
the 3.5 has the starter kill built in as part of the new relay pack, the orange wire is designed for ground when armed. Green is key side of the starter and purple is motor side for the relay pack wiring.
Posted By: Teamrf
Date Posted: January 23, 2004 at 1:34 PM
So where do you hook up the orange wire to if it has a built in starter kill?
-------------
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.
Posted By: kenmci
Date Posted: January 23, 2004 at 11:38 PM
you can use it to add accessories, such as window modules, or additional sensors, pretty much anything you would want to, some bypass modules use the ground when armed wire, also some proximaty sensors use it so that the sensor is only being used when the alarm is on.
Posted By: danxav13
Date Posted: January 25, 2004 at 9:52 AM
Another problem I have with this one is the remote start does not work. I guess it's because I didn't hook up the WHITE/ blue wire on the main harness labeled "remote start activation input (-)" I just don't know what it's supposed to be hooked up to. Please help again
Posted By: kiteman
Date Posted: January 25, 2004 at 10:08 AM
the WHITE/ blue wire is for an external remote start activation., you do not need that. you need to tell us the type and year of vehicle.
Posted By: danxav13
Date Posted: January 25, 2004 at 10:51 AM
Nevermind, stupid me forgot to hookup the nuetral safety switch. Works great now. That's what I get for installing at 2:30 a.m.
|