Print Page | Close Window

Derringer II valet mode?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=25137
Printed Date: July 12, 2025 at 4:12 AM


Topic: Derringer II valet mode?

Posted By: yoda888
Subject: Derringer II valet mode?
Date Posted: January 23, 2004 at 2:46 PM

Hey, all.  It apparently seems like I don't need a new alarm.  Seems the Derringer had some loose wires.  Some jingling of the wires and it seems to "work" fine now.  Sort of at least!

Anyhow, it's in valet mode right now.  Anyone know how to get it into "regular" mode?  I found the button, but it just seems to stay in valet mode. 

ANy help would be great! 

Thanks




Replies:

Posted By: jrilla
Date Posted: January 23, 2004 at 3:01 PM
typically you can turn thr ignition on and then hold the button for 5 seconds. If there is an LED, the LED will be on constantly in Valet mode (typically) and then it should go off after holding the button down for about 5 seconds.   You need to press the button within about 5 to 10 seconds of turning thr ignition on.

-------------
J Rilla

Owner/Installer


Print Page | Close Window