Print Page | Close Window

Sting Pro CL-400 window module

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=25195
Printed Date: May 08, 2024 at 4:13 AM


Topic: Sting Pro CL-400 window module

Posted By: racerjms
Subject: Sting Pro CL-400 window module
Date Posted: January 24, 2004 at 12:36 PM

Has anyone installed one of these, I am having a hard time understanding the wiring diagram. If any one knows what I am talking about then you will understand this.
Blue- ACC
Orange- Overide (+)/unlock (+)
BROWN / White- Overide (-)/unlock (-)
Pink/White- Trigger (+)/Lock (+)
Yellow- Trigger (-)/Lock (-)
Yellow/White- To starter kill

So what I need to do is just hook this up to roll up the windows when armed, so if I am understanding then all I need to do is hook up the Blue to ACC and the Yellow/White to the (-) output(200MA) of the alarm. Can someone help to see if I am correct or not. Thanks



Replies:

Posted By: TrickDaddy
Date Posted: January 31, 2004 at 3:03 AM

Hey racerjms,

  You use the yellow or the yellow/white. Those are your trigger wires for that particular module. I had the yellow/white hooked up as it is described in the diagram, between the starter kill output and the alarm brain. I didn't use the blue ACC wire. Hope this helps.

TrickDaddy



-------------


Print Page | Close Window