I've installed a Pro-Start alarm system, which comes with several options, one of which being keyless entry.
I'm having problems trying to find the relays to hook up this system in the car, but I can at least find the wires that control the lock/unlock functions. This is confusing the heck outta me, I've hooked up the remote start and everything just find, and it runs great, so I'm glad I left this step of it until last.
Does anyone know where the factory door lock relays are in this car??? I understand that I need to hook them up to 86 and 85 of the respective relays, but I don't know if I need to add any new ones. Help!
I've attached the wiring diagram to anyone to can help me. i've also attached the page that explains the wiring of the system from the alarm manufacturer manual.
https://www3.telus.net/~mrpope/IM000735.JPG and https://www3.telus.net/~mrpope/IM000736.JPG

-------------
----
This car is powered by Linux
Should be easy for ya just hook up your relays to
PWR DOOR LOCK | LT BLU | DRV KICK PANEL |
PWR DOOR UNLOCK | BLK | DRV KICK PANEL (TYPE A) |
If ya need the wiring for the door locks here is a diagram
https://www.the12volt.com/relays/page1.asp#n2p
-------------
"Big" Mike
Double Take
Fremont, Ne
remember to check all your wires with a dmm not a test light!!
i take no responsibilty whatsoever for the vailidty of the info nor consequences thereof