Print Page | Close Window

PROBLEM INSTALLING VIPER 791

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=25259
Printed Date: May 16, 2025 at 8:19 AM


Topic: PROBLEM INSTALLING VIPER 791

Posted By: wtcook8657
Subject: PROBLEM INSTALLING VIPER 791
Date Posted: January 25, 2004 at 4:58 PM

does anyone know what to connect the wires from the four pin harness on realay satellite. there is nothing in the installation manual on them other than what they are.



Replies:

Posted By: iskidoo
Date Posted: January 25, 2004 at 5:22 PM
They would be used if your vehicle has more than one IGN or ACC wire. Also use one of the wires if you need to rearm factory security after remote start shutdown. What year and make is your vehicle?



Posted By: wtcook8657
Date Posted: January 25, 2004 at 5:54 PM

its a 95 explorer. there is a factory alarm rearm wire on one of the harnesses but i can't find what wire to connect it to




Posted By: iskidoo
Date Posted: January 25, 2004 at 5:57 PM
Most likely it rearms automatically when you lock the doors.


Print Page | Close Window