Channel 4 Output, Hornet 1500 ESP

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=25291
Printed Date: May 12, 2025 at 11:59 PM

Topic: Channel 4 Output, Hornet 1500 ESP

Posted By: BrettG
Subject: Channel 4 Output, Hornet 1500 ESP
Date Posted: January 26, 2004 at 11:53 AM

Hi,
I installed the HORNET 1500 ESP Alarm and remote Starter in my 92 Camaro RS and everything is working fine EXCEPT one thing. I want to hook up my Street Glow Gold series underglow to the remote. I figured the only way to do this by keeping my trunk release on channel 2 is to use Channel 4, it is H2/3 Violet/Black wire 200 mA (-) Channel 4 Output wire. I hoded it up to the + on my toggle switch in the car so when the - charge goes through they will turn on correct? When I push the buttons for Channel 4 nothing happends at all. Is this hooked up right? or is there another way to do this??

PLEASE HELP ME ASAP!!
Thanks,
Brett

Replies:

Posted By: bmf1000d
Date Posted: January 26, 2004 at 12:05 PM

ok first of all you need to wire a relay to get the proper voltage:

85: channel 4 output

87: to the postive wire on the street glow

30/86: 12v fused constant

87a is not used

then all you have to do is program your hornet channel 4 output for latched then you can use your remote to turn the neon on and off and also retain the switch that came with the street glow.

-------------
"Big" Mike
Double Take
Fremont, Ne
remember to check all your wires with a dmm not a test light!!
i take no responsibilty whatsoever for the vailidty of the info nor consequences thereof

Print Page | Close Window