Aftermarket door lock actuators

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=25301
Printed Date: May 19, 2024 at 8:14 AM

Topic: Aftermarket door lock actuators

Posted By: phredman
Subject: Aftermarket door lock actuators
Date Posted: January 26, 2004 at 2:07 PM

Does anyone have how to wiring for aftermarket doorlock actuators that have the one button feature ,such as the Spal kit ,whereas that if you push on the lock knob,it locks all doors,or if you pull up on the knob,it unlocks all doors.

The question is,how do you wire those for keyless entry and still have that feature? Thanks for any info for that....

Replies:

Posted By: bmf1000d
Date Posted: January 26, 2004 at 5:59 PM

its a knob and not a rocker switch?

-------------
"Big" Mike
Double Take
Fremont, Ne
remember to check all your wires with a dmm not a test light!!
i take no responsibilty whatsoever for the vailidty of the info nor consequences thereof

Posted By: BNLUIS
Date Posted: January 26, 2004 at 6:05 PM

YES IT CAN BE DONE U WILL HAVE TO USE 2 RELAYS AND 5 WIRE DOOR LOCK ACTUATORS.

-------------
Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.

Posted By: phredman
Date Posted: January 26, 2004 at 6:05 PM

central locking kit

Posted By: bmf1000d
Date Posted: January 26, 2004 at 6:10 PM

so they are 5 wire door locks?

-------------
"Big" Mike
Double Take
Fremont, Ne
remember to check all your wires with a dmm not a test light!!
i take no responsibilty whatsoever for the vailidty of the info nor consequences thereof

Posted By: jacksonj
Date Posted: January 26, 2004 at 6:55 PM

From your question it sounds like you already have a Central locking system. If this is the case then do as BNLUIS said

BNLUIS wrote:

YES IT CAN BE DONE U WILL HAVE TO USE 2 RELAYS AND 5 WIRE DOOR LOCK ACTUATORS.

add 2 relays for a 5 wire door lock actuator https://www.the12volt.com/doorlocks/page3.asp#arp

Just hook the Actuator to the drivers door lock in any method you can (depending on your car)

I'm doing this very same thing on my 2002 Elantra that has Central door locks. The Elantra door locks are connected via a cable that I have to attach the actuator to. Here the DIY for the Elantra, maybe the pics can assist you on your project. https://www.elantraxd.com/yabbse/index.php?board=21;action=display;threadid=5070;start=15