2way remote problem
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=25342
Printed Date: July 26, 2025 at 6:52 AM
Topic: 2way remote problem
Posted By: prdjr165
Subject: 2way remote problem
Date Posted: January 27, 2004 at 4:33 AM
I installed a delta pro pager alarm in my car and a friends car,the problem is that the 2way pager works both cars at the same time.I tried reprograming the pager and it didn't help.Any suggestions on how to erase these pagers and start over?
Replies:
Posted By: sparkie
Date Posted: January 27, 2004 at 4:06 PM
Try programming the remote into only one car. Do it 4 times though. Most systems will only accept up to four remotes and that should bump out the duplicate. Programm each car's system this way with the different remotes. If one remote still does both vehicles then you may have found that one in a thousand chance that the remotes both work on the same frequency and code as each other. See if the dealer you bought it from will exchange the remote.
-------------
sparky
Posted By: prdjr165
Date Posted: January 27, 2004 at 6:05 PM
Thank You,I will try that tommorow!
|