2003 Tiburon alarm/start help needed
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=25353
Printed Date: July 22, 2025 at 3:12 PM
Topic: 2003 Tiburon alarm/start help needed
Posted By: AAEgulfcoast
Subject: 2003 Tiburon alarm/start help needed
Date Posted: January 27, 2004 at 10:22 AM
On my own personal vehicle I am installing a crimestopper cs2015fmtw1. I am trying to get the door locks but not having much luck. I am also trying to wire the remote starter and havethe door monitor, bypass, and everything set up except for over riding the clutch safety switch. How do I do so?
Replies:
Posted By: boomer_106
Date Posted: January 27, 2004 at 3:13 PM
Remote Starter Wiring Colors and Notes | Function | | Vehicle Color | Location | Start: | | White (+) | Ignition switch harness | Ignition #1: | | Red (+) | Ignition switch harness* | Ignition #2: | | N/A | Ignition switch harness | Ignition #3: | | N/A | Ignition switch harness | Accessory: | | Pink (+) | Ignition switch harness | Brake Light: | | White (+) | Brake pedal switch | Tach Signal: | | White (AC) | 23 pin connector in passenger kick panel | Parking Lights: | | Pink/Black & GREEN/ Oranger (+) | 22 pin connector @ BCM** | Headlights: | | | | OEM Alarm Disarm: | | | | OEM Alarm Arm: | | | | Diesel Glow Plug: | | | | Clutch Bypass Wire: | | | | Notes: | | *This vehicle is equipped with a transponder immobilizer system. Use Universal Alarm Bypass Module part # 2X402 where X can be any number or use vehicle specific bypass module part # 23554. **The Body Control Module (BCM) is part of the fure/relay box under the driver side dash. |
Alarm and Keyless Entry Wiring Colors and Notes | Function | | Vehicle Color | Location | Constant +12 Volts: | | Red (+) | Ignition switch harness | Starter Kill: | | White (+) | Ignition switch harness | Ignition +12 Volts: | | Red (+) | Ignition switch harness* | Dome Lights/Superv: | | | | OEM Horn: | | GREEN/ Black (-) | Steering column harness | Power Lock: | | Yellow (+) | 12 pin connector @ BCM*** | Power Unlock: | | Blue (+) | 12 pin connector @ BCM*** | Trunk Release: | | Blue (+) | Drivers kick panel | Alarm Input Wire: | | | | Notes: | | ***The yellow wire will test when moving the driver lock knob, the blue wire will test when moving the passenger lock knob. See Note #201 Negative Trigger Door Locks |
Posted By: Big Dog
Date Posted: January 29, 2004 at 10:28 AM
The clutch bypass is done using a relay. The clutch switch is on the clutch pedal bracket and is the one that is closer to the firewall and has a Green and a White wire in the connector. Use a relay to connect these two together during the crank cycle.
Posted By: AAEgulfcoast
Date Posted: January 29, 2004 at 12:53 PM
Thanx guys. I really appreciate it.
|