99 Sunfire remote start with manual

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=25388
Printed Date: July 14, 2025 at 9:23 AM

Topic: 99 Sunfire remote start with manual

Posted By: logger
Subject: 99 Sunfire remote start with manual
Date Posted: January 27, 2004 at 8:41 PM

I am installing a remote start in a Sunfire with a standard trans. I can't figure out the door jamb switches wiring for disarming the RS. Anyone have any ideas? I heard that every wire is different.
Thanks

Replies:

Posted By: sparkie
Date Posted: January 28, 2004 at 6:51 PM

I don't understand what yuor talking about, but the door jamb switches are a negative trigger. The wires are light GREEN/ black (driver's side in driver's kick panel) and light blue (passenger side - located in passenger's kick panel or in plug in driver's kick panel) Test first as there are more than one light blue wires.

-------------
sparky

Posted By: HamiltonAudio
Date Posted: January 29, 2004 at 7:51 AM

yes, they are separate, and need to be diode isolated...

Posted By: logger
Date Posted: January 29, 2004 at 5:57 PM

Thanks for the response,but do I put the diodes on all the wires? and towards the remote starter? oh yeah, are they usually the same colour?
are these the same wires as the door triggers?
Any thoughts?

Print Page | Close Window