Out of Channels on Autopage 750
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=25550
Printed Date: May 09, 2024 at 2:01 AM
Topic: Out of Channels on Autopage 750
Posted By: TrickDaddy
Subject: Out of Channels on Autopage 750
Date Posted: January 30, 2004 at 7:56 AM
I am venting/rolling my windows done using the Trunk Release button on my Autopage 750LCD. I am using two DEI 530Ts. I got the windows configured to roll up when I arm the alarm. With the alarm set, I can vent and roll down the windows, using my Trunk Release button. I want to be able to roll the window up by pressing the lock button on the alarm without disarming and rearming the alarm. The problem I'm running into is, it seems, that I dont get an output on the orange wire to roll the windows up when I press the lock button a second time after the initial arming. Any Ideas???? TrickDaddy
Replies:
Posted By: TrickDaddy
Date Posted: January 30, 2004 at 7:58 AM
I have tried the 450T Channel Expander, I cant use it because I have to hold my trunk release button for 2 seconds before I get an output. Believe me, I have tried, but if the output aint instant, the 450t just wont work.
-------------
Posted By: druid1200mk2
Date Posted: February 11, 2004 at 6:04 PM
use a 12 volt garage door module which is an easy way to expand a channel , you can program the garage door module to activate with any button on the 750lcd. they cost around 30 bucks or so. they have a power ground and negative output...really installer friendly...hope that helps...jeromy
-------------
druid1200 (Jeromy)
Posted By: druid1200mk2
Date Posted: February 11, 2004 at 6:04 PM
also you can program it to do a pulsed , lached, or momentary output. jeromy
-------------
druid1200 (Jeromy)
|