Grand Cherokee alarm/remote starter issue

I have a 2001 Grand Cherokee limited and just installed an Ultrastart 4500XR 2 way FM alarm starter. I bought a JEEP2 data bus interface module that also does the transponder bypass. The problem is when the remote starter shuts off the factory alarm gets re-armed automatically by the module regardless of the state of the alarm before. If it was unlocked before I don't want it to lock after so I don't lock my keys in the car accidentaly.

Is the behaviour of the DEI 455J any different? Where can I get a manual for it? Will it work with my non-DEI starter? Has anyone else installed an alarm/starter combo unit and had this issue and if you haven't then what type of module did you use to interface with door locks.

thanks,
nasdaqbull

-------------
nasdaqbull

you can eliminate this but youll have to use 2 bypasses the omega DBDLM is a data doorlock module that has a separate input for arm and disarm which you can not hook up the arm part  but youll have to use a separate pk bypass or just unhook the violet wire on the one you have now

-------------
tj

This module has an extra factory arm /disarm wire. But regardless of those commands the think automatically re-arms the factory alarm when the GWR(Ground When Running) wire is activated. If this Omega product behaves differently I would be interested in seeing if it works for me. Do you know where I can get more information on it, and eventually where to buy it.

thanks,
nasdaqbull

-------------
nasdaqbull