04 dodge ram parking lights
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=25577
Printed Date: May 03, 2024 at 12:02 AM
Topic: 04 dodge ram parking lights
Posted By: vette013
Subject: 04 dodge ram parking lights
Date Posted: January 30, 2004 at 4:13 PM
i just installed a crimestopper rs999fm in my 04 ram. everything seems to work except the parking lights. i have it connected to the WHITE/ green at the switch with a 330 resistor. the module has a jumper for 12v+ and negative output. i have it set for the negative output. when i lock and unlock, the headlights foglights and the parking lights flash. the same thing when i remote start it, all of the lights are on. am i missing something here?? any help would be appreciated.
Replies:
Posted By: jrilla
Date Posted: January 30, 2004 at 6:01 PM
You need to cut the wire and use a relay to send the negative pulse to the light side, not the switch side.
-------------
J Rilla
Owner/Installer
Posted By: jrilla
Date Posted: January 30, 2004 at 6:04 PM
you still need to resistor too
-------------
J Rilla
Owner/Installer
Posted By: vette013
Date Posted: January 31, 2004 at 6:39 AM
how exactly do i wire up this relay and do i still leave the module's jumper on the negative output?
Posted By: jrilla
Date Posted: January 31, 2004 at 10:19 AM
Pin 30 to light side of wire
Pin 87a to switch side
Pin 87 to the resistor and then to ground
Pin 85 to ground
Pin 86 to the positive parking light output
It would just be easier to use the positive parkinglight output from the starter
-------------
J Rilla
Owner/Installer
Posted By: vette013
Date Posted: January 31, 2004 at 11:34 PM
thanks, i will try that. i just need to find another relay first.
Posted By: securinu
Date Posted: February 01, 2004 at 2:22 AM
skip that if you have a 12+ output find the WHITE/ gray wire in the large harness above park brake and that should be your 12v+ park light wire no resistor needed.
-------------
Joe O'Byrne
Owner / Installer
Posted By: kiteman
Date Posted: February 02, 2004 at 10:27 AM
Also, you can use the BLACK / YELLOW wire under the hood in the harness above the brake booster. this wire is positive trigger or you can go directly to the parking light relay and tie a wire off the 30 pin
Posted By: vette013
Date Posted: February 02, 2004 at 10:43 AM
the 12+ WHITE/ gray wire worked perfectly. thanks to all of you for your help. it all works as it should now!!
|