2003 Yukon Denali remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=25579
Printed Date: May 21, 2024 at 7:08 AM

Topic: 2003 Yukon Denali remote start

Posted By: playhardaudio11
Subject: 2003 Yukon Denali remote start
Date Posted: January 30, 2004 at 5:20 PM

I am havinh a difficult time finding the brake wire which is suppose to show +12 volts when the brake pedal is depressed. I have one diagram that says it is a white wire at the brake switch but when I hooked it up and activated the remote start the truck would not shut off be pressing the brake. A new problem has arose though. Now the brake lights don't work nor the cruise. I am wondering if anyone knows what color harness this white wire is in, it's location, and how many and what color the other wires are?

Thanks

Replies:

Posted By: jrilla
Date Posted: January 30, 2004 at 5:49 PM

Well did you test the wire before you hooked it up? If you disconnected the wire, and it still doesnt work, then you probably blew a fuse.

Be sure to test the next wire before you hook it up again.

-------------
J Rilla

Owner/Installer

Posted By: prdjr165
Date Posted: January 30, 2004 at 6:07 PM

It's suppose to be a white wire at the brake pedal switch,Always check with a DVM before connecting your wire!You probably blew a fuse.