Anyboby have any installiation tips for a 2002 tahoe or 2003 tahoe I am going hame next week to do the install for a freind and want to take everything i need. He has a command start 310I and a passlock 2 module. I am wondering if i need a doorlock interface module or can I just do it with positive pulse using relays and pulsing at keykess entry module.
-------------
murraywatchel
The big thing here is going to be whether it is a 2002 or a 2003. If it's a 2002, you can tap the locks at the bcm. If it's a 2003, you'll want to pickup a lock interface that works through the databus. Also 2002 has parking lights (+) @ the BCM, and 2003 has parking lights (-) @ the bcm. Ignition wires will be the same in both trucks. Check the vin to see whether it is an 02 or an 03 and go from there. Good luck,
Mike
Yeop. Did a Matrix RSX3.5 on an '02 Tahoe. You have to know what year your Tahoe is. An '03, you can use the databus kit from bypasskit.com / transponderbypass.com. I'd say that would be the easiest. The '02 Tahoe that I did wasn't so bad. (Hey it was mine, took my time)
Do it once, do it right. PM me if you have questions, and I can email you the pics etc.
-------------
these are probably one of the easiest vehicles to install a remote starter in. start to finish in less than an hour, i love em. every wire you need is in one central location, i wish every car was that easy.
-------------
Mike Battaglia
Specialized Car Audio
Bensenville IL 60106