88 Mustang Locks
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=25641
Printed Date: May 17, 2025 at 7:30 AM
Topic: 88 Mustang Locks
Posted By: rckid
Subject: 88 Mustang Locks
Date Posted: January 31, 2004 at 10:11 PM
Im installing a Viper 690vx alarm in an 88 Mustang and I don't understand the door lock diagrams. I know its the 5 wire locks and I know what the colors are. But im looking at the wiring diagram on this site for the 5 wire locks and i don't get it. The alarm had 2 wires for the lock. A green one which is -lock and +unlock output. And a blue one which is +lock and -unlock output. Looking at the diagram it says I need a -lock and -unlock output. How do I do this? I have to be missing something.
Thanks,
Clay G.
Replies:
Posted By: daniel2002p
Date Posted: January 31, 2004 at 11:01 PM
you do have them, you green wire is a lock through ground, and the blue one is unlock through ground. use the GREEN for lock, and BLUE for unlock. that shuld do it.
-------------
2005 Toyota Corolla S
1.8L VVT-i I-4
Always double check your wires with a DMM!!!
Do Not Use A Test Light!!!
MECP Certified Installer!
Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!
Posted By: rckid
Date Posted: January 31, 2004 at 11:19 PM
Ok thanks. Ill try that tomorrow.
Posted By: rckid
Date Posted: February 01, 2004 at 10:20 PM
That worked but i had to switch the green and blue wires to get them to work right.
Thanks!
|