Print Page | Close Window

RAM 2002

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=25682
Printed Date: August 02, 2025 at 6:44 PM


Topic: RAM 2002

Posted By: roncoleman11
Subject: RAM 2002
Date Posted: February 01, 2004 at 6:29 PM

Has any body out there done one yet, it's a pain in the :oops:. i would like to know where you tap in for the tach. and where else was your problem area's



Replies:

Posted By: daniel2002p
Date Posted: February 01, 2004 at 7:05 PM
you tach will be the odd colored wire at the injectors, and nothing else war really a pain, they are fairly simple trucks to work on.

-------------
2005 Toyota Corolla S
    1.8L VVT-i I-4
Always double check your wires with a DMM!!!
Do Not Use A Test Light!!!
MECP Certified Installer!
Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!




Posted By: roncoleman11
Date Posted: February 01, 2004 at 7:17 PM
which one should i use. and do you know the resistor levels for the lights and doors.




Posted By: Alpine Guy
Date Posted: February 01, 2004 at 8:12 PM
330 ohm resistor for (-) parking lights  yellow/purple.   That was all a memory flash, im shure some will send you a wire diagram.




Posted By: RufNUSD
Date Posted: February 01, 2004 at 11:58 PM
do a search....

-------------
Someone pass me that bottle.




Posted By: kiteman
Date Posted: February 02, 2004 at 9:57 AM
        Parking lights are 330 ohm or 1.4k ohm..    door lock is 820 ohm and unlock is 330 ohm.  all are negetive trigger.   But you can also get a positive trigger wire under the hood.  the wire is BLACK / YELLOW and you can either catch it at the relay ( at the power center)  or the wire should be in the harness on the driver side just above the brake boster.





Print Page | Close Window