window module install
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=25720
Printed Date: May 19, 2024 at 12:41 AM
Topic: window module install
Posted By: wastelandsoljah
Subject: window module install
Date Posted: February 02, 2004 at 2:24 PM
Can anyone tell me what the 500ma activation wire(orange) is?
Replies:
Posted By: wastelandsoljah
Date Posted: February 02, 2004 at 2:47 PM
sorry i meant the " to accessory item"(pink)
Posted By: danw2002
Date Posted: February 02, 2004 at 4:25 PM
what model module?
-------------
Danw2002, 20+ years doing custom nut ball things...in Seattle..
Posted By: wastelandsoljah
Date Posted: February 02, 2004 at 5:03 PM
no model number... looks pretty generic
Posted By: danw2002
Date Posted: February 02, 2004 at 5:10 PM
mm, could be a output, or input, my guess is output by looking at the diagram. you could also pull it apart and look at the board, may have a brand on it , that would help. more then likely, when the unit is triggered , the acc. wire puts out voltage, to let you triger something to work only when the window module is working....
-------------
Danw2002, 20+ years doing custom nut ball things...in Seattle..
Posted By: wastelandsoljah
Date Posted: February 02, 2004 at 5:36 PM
ill try that. thanks for the advise
Posted By: Dreadlock
Date Posted: February 03, 2004 at 1:28 PM
orange is ground when armed, the pink will go to your aux output.
Posted By: tcool
Date Posted: February 03, 2004 at 5:18 PM
I'm pretty sure the pink goes to your starter kill relay. The starter kill relay output from your alarm goes to the orange wire on the window module to activate the windows, and the module outputs the same negative signal on the pink wire to go to your starter kill relay instead. ------------- bzzzzttttt
Posted By: mobiletoys2002
Date Posted: February 03, 2004 at 5:28 PM
i think th epink would be to drive a relay for maybe shock sensor bypass while windows are roling up! All the modules i have used had this wire im sure that is what it is for u probably have to do noting with that wire.
Posted By: gtchida
Date Posted: February 03, 2004 at 10:06 PM
It can be used with a relay for disconnecting a sensor such as impact so when the windows are in motion while armed, the alarm does not trigger. I recently installed one just like the one you have. Gary
|