Print Page | Close Window

Dome Supervision, Clifford Matrix RSX 3.5, 03 Dodge Dakota

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=25883
Printed Date: May 06, 2024 at 4:07 AM


Topic: Dome Supervision, Clifford Matrix RSX 3.5, 03 Dodge Dakota

Posted By: diabloed
Subject: Dome Supervision, Clifford Matrix RSX 3.5, 03 Dodge Dakota
Date Posted: February 05, 2004 at 2:27 AM

Ok I am working on installing a Clifford Matrix RSX 3.5 on a 2003 Dodge Dakota Extended Cab.

I have the door trigers all wired right, to the tan & tan/red. dioed isolated. But I am having troubles getting the dome supervision to work with it all. Should I have it with a diode off of one of the door trigers?

I have tried all sorts of combinations and have just confused myself!

Please Help

TIA



Replies:

Posted By: HamiltonAudio
Date Posted: February 05, 2004 at 8:11 AM

I can't remember...are the door triggers negative or positive?  is there not a interior light under the dash area somewhere?  if so, can you not power the domelight supervision from that?  if not, you should be able to just trigger the doorpin....wire it "ahead" of the diodes and you should be ok.

b




Posted By: diabloed
Date Posted: February 05, 2004 at 8:16 AM
yeah they are negative, and there are no under dash lights. so i will try wiring ahead.



Posted By: diabloed
Date Posted: February 05, 2004 at 9:53 AM
Yeah not sure how i missed this one at 4am??? i had the door trigers double diode isolated from the BCM, and then had dome sup. wire heading into uncoming traffic..:)



Posted By: HamiltonAudio
Date Posted: February 05, 2004 at 2:18 PM

diabloed wrote:
Yeah not sure how i missed this one at 4am??? i had the door trigers double diode isolated from the BCM, and then had dome sup. wire heading into uncoming traffic..:)

I figured that might be the case  posted_image  So you were able to wire ahead of the diodes and get domelight supervision working just fine, right?  :)

b


Print Page | Close Window