Print Page | Close Window

451M on a 96 Pontiac Sunfire

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=25903
Printed Date: June 03, 2024 at 6:54 PM


Topic: 451M on a 96 Pontiac Sunfire

Posted By: jeffe49
Subject: 451M on a 96 Pontiac Sunfire
Date Posted: February 05, 2004 at 5:18 PM

I have a 1996 Pontiac Sunfire 2.4L and I am installing a Clifford RSX 3.5. It came with a 451M door lock relay setup. The install guide doesn't even mention the 451M or how to wire it. It labels the relays on the back , but I am still not 100% with it. Can anyone tell me how to wire it up to my power door locks, or where I can get an install guide for the 451M? I checked directed.com & directechs.com but the 451M link does not work.

Please help!




Replies:

Posted By: sroth140
Date Posted: February 05, 2004 at 6:33 PM

the 451m comes with directions unless you threw them away.  the cavalier/sunfire uses (non keyless cars) 5 wire door locks.  take the purlpe to 12v constant, cut the light blue lock wire in the kick panel and use the GREEN/ black and WHITE/ black on the switch side and motor side.  then cut the white unlock wire and use the blue/black and BROWN / black wire on the switch side and motor side.

if the car has keyless entry already the the locks are + trigger, take PURPLE / black to 12v constant, and use blue/black and GREEN/ black as unlock and lock.  cap off bown/black and WHITE/ black.





Posted By: misterjimbo
Date Posted: February 05, 2004 at 7:24 PM
also on the sunfire if it does not have factory keyless the locks are five wire but... they are mastered from the passenger side.

-------------





Print Page | Close Window