Print Page | Close Window

Viper 791XV

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=25906
Printed Date: May 01, 2024 at 4:39 AM


Topic: Viper 791XV

Posted By: uncpaul728
Subject: Viper 791XV
Date Posted: February 05, 2004 at 5:51 PM

One Quick Question Anybody The Shock Sensor  where does the green wire go ?  the blue on the h1 harness or do I need to hook up the blue and green  to the blue main harness?  I thought the plug would take care of the blue one?



Replies:

Posted By: mobiletoys2002
Date Posted: February 05, 2004 at 6:15 PM
it usually goes nowhere it is for another sensor tape up thats all!



Posted By: uncpaul728
Date Posted: February 05, 2004 at 6:22 PM
Thanks



Posted By: mobiletoys2002
Date Posted: February 05, 2004 at 6:25 PM
no problem!



Posted By: Teamrf
Date Posted: February 05, 2004 at 6:35 PM
Yea I've never used that wire. I usually just tape it up with those wires coming from that shock sensor, and zip tie the shock sensor

-------------
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.



Posted By: Puddy905
Date Posted: March 03, 2004 at 12:30 PM
The blue h1 wire on the h1 harness can be used for an additional sensor. This is what sold me, since that blue wire activates as Zone 4, and shows as a completely independant sensor on the LCD remote (sensor 2).


Print Page | Close Window