Print Page | Close Window

Adding pwr.locks&remote start to ’03 DQC

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=25908
Printed Date: May 21, 2024 at 7:25 PM


Topic: Adding pwr.locks&remote start to ’03 DQC

Posted By: riggie
Subject: Adding pwr.locks&remote start to ’03 DQC
Date Posted: February 05, 2004 at 6:17 PM

Hello all,

Nice work here!  This is my first post.  I hope someone may have some experience in what I am asking.  Here goes:I have a 2003 Dodge Dakota Quadcab.  It does not have power windows or locks, nor does it have the factory anti-theft (has black key, not grey).  I purchased a remote starter kit with all relays and whatnot, as well as a 4-door power lock kit with all relays and whatnot.  My question is this-anyone have any experience in adding power locks to a vehicle that has none?  Also, anyone have a wire color/location chart for this vehicle?  How about tips on removing the door panels for the power locks?  Thanks alot.  I'd really appreciate any help I can get.  Keep up the good work!




Replies:

Posted By: misterjimbo
Date Posted: February 05, 2004 at 7:49 PM
done power locks on many cars, and not all of them will accept aftermarket actuators. i do not think you should have any problems, just make sure you get the angle on the connecting rod at the proper angle

-------------


Print Page | Close Window