Print Page | Close Window

Aftermarket alarm disarm /w RS

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=25982
Printed Date: September 10, 2025 at 5:13 AM


Topic: Aftermarket alarm disarm /w RS

Posted By: tianlihu
Subject: Aftermarket alarm disarm /w RS
Date Posted: February 07, 2004 at 12:47 AM

Does anyone know how to disarm the Aftermarket  alarm when using remote starter to start the car (if there is a way to do so)?



Replies:

Posted By: prdjr165
Date Posted: February 07, 2004 at 6:11 AM
What kind of alarm are you using?Why dis-arm when remote starting?




Posted By: Alpine Guy
Date Posted: February 07, 2004 at 4:54 PM

Im guessing you alarm goes off when you remote start?  Either because the shock sensor or the starter kill is engaging.   What i did for my set up was disconnect the ignition wire from my alarm so it dosn't go off when it recieves the signal from remote starting.   Just this completely disables the alarm from sensing igniton.

Now that i think of it,,im shure someone could draw up a relay bypass so it blocks current to the alarm when the remote starter is running. 





Posted By: bmf1000d
Date Posted: February 07, 2004 at 6:13 PM
IF your alarm is going off when you RS your vehicle then you need to send a signal to your factory disarm wire. What kind of car do you have we can tell you what wire you need to disarm?

-------------
"Big" Mike
Double Take
Fremont, Ne
remember to check all your wires with a dmm not a test light!!
i take no responsibilty whatsoever for the vailidty of the info nor consequences thereof




Posted By: tianlihu
Date Posted: February 08, 2004 at 12:17 AM

Thank you all of you, the car and alarm information as follow:

I am going to install the remote starter on 96 plymouth voyager, this car already has the aftermarket pursuit alarm installed. what I want to do is when I remote start the car , the alarm can be disarmed.





Posted By: jgold47
Date Posted: February 08, 2004 at 9:35 PM

what is the exact model of alarm in your car now...

what is the exact model of remote start you are trying to install...





Posted By: tianlihu
Date Posted: February 09, 2004 at 2:46 AM

I don't know what model this alarm system is. but I see the brand name "pursuit" on the alarm remote  control.

The remote starter is ez-start-25.






Print Page | Close Window