Toyota Rav4 install help?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26010
Printed Date: August 30, 2025 at 1:24 AM
Topic: Toyota Rav4 install help?
Posted By: gc714
Subject: Toyota Rav4 install help?
Date Posted: February 07, 2004 at 4:42 PM
Hey Everyone, Awesome info on this site, but I can't seem to find a answer for this one... I recently installed a Crimestopper RS-900 VI remote starte in my Mom's '99 Rav4 L, and was sucessful with everything except the lock feature. I don't remember the wire colors, but I found 2 wires that show with either the lock button or the key in door, but neither will work with the new key fob. I thought the unlock was going to be the tricky part! Any Help would greatly be appricieated! Greg
Replies:
Posted By: gc714
Date Posted: February 07, 2004 at 4:45 PM
gc714] wrote:
p>Hey Everyone,Awesome info on this site, but I can't seem to find a answer for this one... I recently installed a Crimestopper RS-900 VI remote starte in my Mom's '99 Rav4 L, and was sucessful with everything except the lock feature. I don't remember the wire colors, but I found 2 wires in the driver's kick panel that show with either the lock button or the key in door, but neither will work with the new key fob. I thought the unlock was going to be the tricky part! Any Help would greatly be appricieated! Greg
Posted By: bmf1000d
Date Posted: February 07, 2004 at 6:14 PM
Power Lock: | | BLUE/WHITE | BLUE # PIN CONNECTOR IN DR. KICK *** | Power Unlock: | | BLUE / YELLOW | IBLUE # PIN CONNECTOR IN DR. KICK *** |
------------- "Big" Mike
Double Take
Fremont, Ne
remember to check all your wires with a dmm not a test light!!
i take no responsibilty whatsoever for the vailidty of the info nor consequences thereof
Posted By: prdjr165
Date Posted: February 07, 2004 at 6:53 PM
Try neg. pulse at intergration relay under drivers dash.
lock...blue/wht
un-lock...blue/yell.
Posted By: circus boy
Date Posted: February 08, 2004 at 1:29 AM
and dont forget the blue wire its the child safty wire.
also i have seen the rav 4 have 2 lock wires and onl one unlock
Posted By: gc714
Date Posted: February 08, 2004 at 7:52 AM
What is it I need to do with the child saftey wire? And if it has 2 lock wires would I then connect the 1 alarm wire to both factory lock wires? Thanks, Greg
Posted By: mobiletoys2002
Date Posted: February 08, 2004 at 11:12 AM
listen there is a relay under the dash on the drivers side if you lock the doors with the switch u will hear this click!!!!That is where u wanna be, the wire colors are blue/white for lock and blue / YELLOW for unlock these are negative triggered so use the negative output for the doors locks! If it had a child safety then u will need a diode and face the band towards the alarm on the unlock wire and the other side of the diode will go to a blue wire that is how u do child safety! The child safety wire gets pulsed ground when the unlock switch is pressed or when the key is turned in the passenger door i believe.
I would try not to get the child safety wire u may not need to!!
Posted By: mobiletoys2002
Date Posted: February 08, 2004 at 11:14 AM
And i also think in the owners manual it tells u how to turn child safety off !!
Posted By: gc714
Date Posted: February 08, 2004 at 2:12 PM
Thanks Man, I'll give that another try. I just thought I was really missing something by not getting the lock feature to work. And I never heard anything about the child saftey wire before, Thanks Again, Greg
Posted By: mobiletoys2002
Date Posted: February 08, 2004 at 2:22 PM
listen gc714 you dont need the child safety wire to make the door locks work,just hook up the 2 wires i told you and that is all!!! u may not need th echild safety wire hooked up and i told you there is a way of turning that feature off! If you dont have kids u dont need it!! Last thing if the door lock wires off the alarm cannot work the locks with th ewires i told you then it may need a stronger ground to do this would require 2 relays but i dought this ,just letting you know! If you need anything else pm me or post back here. good luck
|