Toyota Sienna Disarm help

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26058
Printed Date: November 06, 2025 at 1:37 AM

Topic: Toyota Sienna Disarm help

Posted By: mchetram
Subject: Toyota Sienna Disarm help
Date Posted: February 08, 2004 at 12:56 PM

hey guys,

I need you all help with the Disarm function on the 2004 toyota seinna. When I remotestart the vehicle the factory alarm would go off is there anyway I can disarm this during remote start ....

working with:

Viper 560xv (DIE)

I found the Key sense wire to disarm the vehicle but it does seem to working .... can some help me please ...

thank you,

mchetram

-------------
Jazz

Replies:

Posted By: whitey
Date Posted: February 08, 2004 at 1:19 PM

You need to use eithe the blue wire from the 4 pin harness on the XRC relay pack or the blue white wire from the 5 pin harness at the 560 and pulse the key sense wire to disarm the security on start up.

Hope that helps

-------------
Visions Edmonton
Installation Manager, DLS
MECP Certified First Class

Print Page | Close Window