clifford intelistart remote start problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26189
Printed Date: May 10, 2025 at 12:10 PM

Topic: clifford intelistart remote start problem

Posted By: SCOTTB007
Subject: clifford intelistart remote start problem
Date Posted: February 09, 2004 at 11:16 PM

I can't get the remote start to work with the clifford 700IQ when it is armed. It will start with the alarm turned off just fine. The remote start has a 18 guage brown / white wire which hooks to the IQ700 to a BROWN / white wire . This wire is called a alarm ignition sense wire. I think this is where the trouble is. I am installing this in a 1987 chevrolet full size truck. Any one seen this ?

Thanks,

Scott

Replies:

Posted By: Trav3D1
Date Posted: February 10, 2004 at 9:39 AM

Hey Scott,

I have done this on several alarms as well by mistake, but it sounds like your starter wire for the remote start is on the incorrect side of the OEM starter wire. Try switching the sides and re-test.

-------------
Trav

Print Page | Close Window