how to install a magnetic kill switch ?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26219
Printed Date: September 01, 2025 at 8:10 PM

Topic: how to install a magnetic kill switch ?

Posted By: cglenn
Subject: how to install a magnetic kill switch ?
Date Posted: February 10, 2004 at 1:06 PM

How would I install a magnetic type kill switch which would interupt either the starter or the fuell system ? What would be needed and could a professional give me some pointers as off the shelf alarms are definitely a joke. All help will be greatly appreciated. I am definitely wiring impaired as I know what I want to be able to do just don't have a clue how to get there !

Replies:

Posted By: sufferrar
Date Posted: February 10, 2004 at 1:48 PM

Send me your e-mail adress and i'll send you a diagram of the circuit i used in my car...
ian.boodhoo@petrotrin.com

-------------
"I'm So Loud It Hertz"

Posted By: cglenn
Date Posted: February 11, 2004 at 9:48 AM

Come on you professionals out there. Help !!!!

Posted By: sufferrar
Date Posted: February 11, 2004 at 10:17 AM

The speed input is where i have a 15km\hr speed switch that locks my door automatic...

-------------
"I'm So Loud It Hertz"

Print Page | Close Window