g4 c300 LED staying on

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26245
Printed Date: September 07, 2025 at 2:43 AM

Topic: g4 c300 LED staying on

Posted By: kezzy4
Subject: g4 c300 LED staying on
Date Posted: February 10, 2004 at 8:10 PM

hey, need help here, lol

i recently lost my remotes for my concept 100 and rather than pay for 2 new remotes i thought i would mod the system to fit my concept 300 black box and remotes

i got the diagrams but i'm not sure if something is not compatible or there is an error in my concept 300 diagram

the problem is that nothing really happens, the LED stays on insted of flashing, the indicators will flash when the buttons are pressed but the doors dont lock or open, the immobiliser and alarm dont arm

any one know why?? i'm really stuck and frustrated

Replies:

Posted By: daniel2002p
Date Posted: February 10, 2004 at 8:21 PM

you might be in vallet mode, make sure that valet mode is not on.

-------------
2005 Toyota Corolla S
1.8L VVT-i I-4
Always double check your wires with a DMM!!!
Do Not Use A Test Light!!!
MECP Certified Installer!
Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!

Posted By: daniel2002p
Date Posted: February 10, 2004 at 8:22 PM

also make sure that when the exchange was made that the right wires a re in the right slots.

-------------
2005 Toyota Corolla S
1.8L VVT-i I-4
Always double check your wires with a DMM!!!
Do Not Use A Test Light!!!
MECP Certified Installer!
Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!

Posted By: kezzy4
Date Posted: February 11, 2004 at 9:55 AM

if its in valet mode would it not still lock the doors and start the car? it is a system i had fitted to another car, is it possible it needs reset to the different sensors? concept 100 piezo sensor is there, and the concept 300 dont have one. also c 100 has a glass tapering mic and the c 300 has a proxi sensor 3, could this be the problem?

just in case how do you switch off valet mode??