Valet switch problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26293
Printed Date: September 11, 2025 at 3:05 AM

Topic: Valet switch problem

Posted By: stevebvo
Subject: Valet switch problem
Date Posted: February 11, 2004 at 3:42 PM

My valet switch is not responding, I tested the switch itself and it's good. I need this switch to program diffrent features. It will not overide the alarm either. The alarm is a Cammando 5005 installed in an 97 f150. If its the unit itself is there any other way to program the features. Thanks

-------------
stevebvo

Replies:

Posted By: Dreadlock
Date Posted: February 11, 2004 at 5:13 PM

i dont know about that particular alarm , but make sure ignition and door trigger are hooked up. cause you know on dei if they are not it wont program.

Print Page | Close Window