Print Page | Close Window

Porsche Remote Start Problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26298
Printed Date: May 23, 2024 at 8:56 AM


Topic: Porsche Remote Start Problem

Posted By: nevek
Subject: Porsche Remote Start Problem
Date Posted: February 11, 2004 at 5:01 PM

The car is a 1989 Porsche Carrera 4

Anyway it is trying to start but just turns over, almost like it is not getting fuel. I am thinking an iginition wire, but I allready have 2 hooked up, the only other wire is a Grey one coming from the ignition harness. It reads Positive 12v at idle, but when ignition is on it loses its 12v. Does anyone know the solution or how to hook up to this wire if necessary.

Thanks in advance
Kevin




Replies:

Posted By: Velocity Motors
Date Posted: February 11, 2004 at 6:53 PM
What wire did you use for the tach signal ?

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA



Posted By: nevek
Date Posted: February 11, 2004 at 7:02 PM

I got the correct tach wire, but it is running off of alternator mode.




Posted By: Velocity Motors
Date Posted: February 11, 2004 at 7:17 PM
There's your problem. How does the unit know that the car is running if the CPU is switched over to alternator mode when there's nothing attached to it ??

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA



Posted By: nevek
Date Posted: February 14, 2004 at 10:27 AM
what needs to be attached to it?


Print Page | Close Window