Print Page | Close Window

resistors

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26311
Printed Date: July 06, 2025 at 12:56 PM


Topic: resistors

Posted By: godsegoizhuge
Subject: resistors
Date Posted: February 11, 2004 at 9:51 PM

Could someone possibly help me with the calculations and exactly how i would wire up a some resistors to get to a 2.1 ohm load and also a 180 ohm load?   I get alil confused and lost when it comes to the whole calculations of the resistors values.   If you wanna know what it's for, it's for the 04 town and country, trying for the parking lights and the negative starter wire. Thanks



Replies:

Posted By: bmf1000d
Date Posted: February 11, 2004 at 10:37 PM

sure 1 150ohm resistor and 2 15ohm resitors for the 180

and 1 2Kohm and 1 100ohm resitors for the parklights

Now seeing as your doing a T and C i had problems with the negative ignition wire i suggest to diode isolate that wire cause if it see ANY current from your RS it will not turn on the radio and heater. IF you have any more questions on that vehicle please feel fee to PM me and i will help



-------------
"Big" Mike
Double Take
Fremont, Ne
remember to check all your wires with a dmm not a test light!!
i take no responsibilty whatsoever for the vailidty of the info nor consequences thereof


Print Page | Close Window